ANALYSES OF DIFFERENT PROTOCOLS FOR MULTIPATH ROUTING IN WSN

Authors

  • Suseela B

DOI:

https://doi.org/10.29284/ijasis.4.2.2018.23-30

Keywords:

Energy Efficient Multipath Routing, Secure and Energy Efficient Multipath Routing, Cooperative Multi path Routing, Bandwidth Aware Multipath Routing, QoS Multi path Routing, wireless sensor network

Abstract

Modern progress in Wireless Sensor Networks (WSNs) for instance observation, traffic observation as well as storeroom of probable applicable are planned to cherish the authentic planet. For these network severe necessities of quick, dependable protocol to convene the restraint that is latency, highest packet received ratio, good put as well as energy efficiency. In this article we have reviewed the several multi path routing protocols such as Energy Efficient Multi Path (EEMP) routing protocol, Secure and Energy efficient Multi Path (SEMP) routing protocol, Bandwidth Aware Multi Path (BAMP) routing protocol, Cooperative Multi Path (CMP) routing protocol as well as QoS Multi Path (QoSMP) routing protocol. The simulation of multi path routing is offered depend on packet received ratio, average delay as well as energy efficiency in WSN.

Downloads

Download data is not yet available.

References

J. He, and J. Rexford, “Toward internet-wide multipath routing. IEEE network”, Vol. 22, No. 2, 2008, pp. 16-21.

T.M. Conte, U.S. Patent No. 8,582,502. Washington, DC: U.S. Patent and Trademark Office, 2013.

S.J. Lee, and M. Gerla, “Split multipath routing with maximally disjoint paths in ad hoc networks”, IEEE International Conference on Communications, 2001, pp. 3201-3205.

M.A. Salkuyeh, and B. Abolhassani, “An adaptive multipath geographic routing for video transmission in urban VANETs”, IEEE Transactions on Intelligent Transportation Systems, Vol. 17, No. 10, 2016, pp. 2822-2831.

A. Gopalan, and S. Ramasubramanian, “IP fast rerouting and disjoint multipath routing with three edge-independent spanning trees”, IEEE/ACM Transactions on Networking, Vol. 24, No. 3, 2015, pp. 1336-1349.

D. Han, and J.M. Chung, “Self-similar traffic end-to-end delay minimization multipath routing algorithm”, IEEE Communications Letters, Vol. 18, No. 12, 2014, pp. 2121-2124.

A. Taha, R. Alsaqour, M. Uddin, M. Abdelhaq, and T. Saba, “Energy efficient multipath routing protocol for mobile ad-hoc network using the fitness function”, IEEE access, Vol. 5, 2017, pp. 10369-10381.

A. Liu, Z. Zheng, C. Zhang, Z. Chen, and X. Shen, “Secure and energy-efficient disjoint multipath routing for WSNs”, IEEE Transactions on Vehicular Technology, Vol. 61, No. 7, 2012, pp. 3255-3265.

H. Xu, L. Huang, C. Qiao, Y. Zhang, and Q. Sun, “Bandwidth-power aware cooperative multipath routing for wireless multimedia sensor networks”, IEEE Transactions on Wireless Communications, Vol. 11, No. 4, 2012, pp. 1532-1543.

Y. Ganjali, and A. Keshavarzian, “Load balancing in ad hoc networks: single-path routing vs. multi-path routing:, In IEEE INFOCOM, 2004, pp. 1120-1125.

F. Tang, H. Zhang, and L.T. Yang, “Multipath Cooperative Routing with Efficient Acknowledgement for LEO Satellite Networks”, IEEE Transactions on Mobile Computing, Vol. 18, No. 1, 2018, pp. 179-192.

H. Geng, X. Shi, X. Yin, Z. Wang, and S. Yin, “Algebra and algorithms for multipath QoS routing in link state networks” Journal of Communications and Networks, Vol. 19, No. 2, 2017, pp. 189-200.

Downloads

Published

2018-12-28

Issue

Section

Articles

How to Cite

[1]
S. B, “ANALYSES OF DIFFERENT PROTOCOLS FOR MULTIPATH ROUTING IN WSN ”, IJASIS, vol. 4, no. 2, pp. 23–30, Dec. 2018, doi: 10.29284/ijasis.4.2.2018.23-30.