Enhancing LED Modeling Accuracy to Extract Practical Parameters and Compare Simulation
DOI:
https://doi.org/10.29284/khr4ng42Keywords:
Power LED, extracted parameters, LED model, comparative analysis, TopSpiceAbstract
In paper a comprehensive analysis of the parameters identification required for a more accurate model of the Light-Emitting Diodes (LEDs) and their subsequent use in simulator software is presented. The focus of the study is on parameter extraction from the LED model, including the key variables such as LED capacitance value, saturation current, emission coefficient, shunt resistance, and series resistance. This work showcases of practical methodology for parameter extraction that yields results closely aligned with simulation outcomes when the extracted parameters are incorporated into the simulation framework. The insights gained from this study contribute positively to the field of LED modeling and facilitate the development of more accurate LED model parameters.
References
[1]. A. Poppe, "Simulation of LED Based Luminaires by Using Multi-Domain Compact Models of LEDs and Compact Thermal Models of their Thermal Environment," Budapest University of Technology and Economics, 2017.
[2]. K. Górecki, P. Ptak, "New dynamic electro-thermo-optical model of power LEDs," Gdynia Maritime University, 2018.
[3]. G. Farkas, A. Poppe, "Multi-Domain Modelling of LEDs for Supporting Virtual Prototyping of Luminaires," Budapest University of Technology and Economics, 2019.
[4]. Delphi4LED Consortium, "Requirements Specification for Multi-Domain LED Compact Model Development in Delphi4LED."
[5]. Krzysztof Baran, Antoni Ró˙zowicz, Henryk Wachta and Sebastian Ró˙zowicz, "Modeling of Selected Lighting Parameters of LED Panel”, Energies 2020, 13, 3583
[6]. G. Stepniak and J. Siuzdak, "Influence of Lighting LED Design Parameters on the Dynamic Nonlinear Response", IEEE, Journal of Lightwave Technology, vol. 40, no. 4, pp. 954-960, Feb. 2022.
[7]. Pau Salvador, Vicenç Almenar, Juan Luis Corral, Javier Valls, and Maria Jose Canet, “Model and Methodology to Characterize Phosphor-Based White LED Visible Light Communication Links”, Sensors 2023, 23, 4637
[8]. Xiong Deng , Miao Zhang, Wei Pan, Ziqiang Gao, Jundao Mo, Chen Chen, Xiping Wu, Xihua Zou, Lianshan Yan, and Jean-Paul Linnartz, “Physics-Based LED Modeling and Nonlinear Distortion Mitigating With Real-Time Implementation”, IEEE photonics journal, vol. 14, no. 6, december 2022
[9]. Hasan A. Abdulmajeed Salbi, Fahad Al-Amyal, Kiss P´eter, “Numerical harmonic modelling of low wattage LED lamps based on parameter estimation algorithms”, Elsevier, September 2024
[10]. Joachim Piprek, “Simulation and modeling of LED manufacturing process based on Flexsim”, Optical and Quantum Electronics (2021), Springer, 2021
[11]. Joachim Piprek, “Efficiency Models for GaN-Based Light-Emitting Diodes: Status and Challenges”, Materials 2020, 13, 5174
[12]. Abdelhalim Zekry, Sarah A. Elariane, Hoda Elsharkawy, “Careful Development Can Enhance LED Luminaire for Office Lighting”, Communications on Applied Electronics (CAE), Vol. 4, pp. 11-22, April 2016
[13]. Wenqing Niu, Zengyi Xu, Yu Liu, Xianhao Lin, Jifan Cai, Jianyang Shi , Xiaolan Wang, Guangxu Wang, Jianli Zhang, Fengyi Jiang, Zhixue He , Shaohua Yu, Chao Shen , Junwen Zhang , and Nan Chi “Key Technologies for High-speed si-substrate led based visible light communication”, IEEE, journal of lightwave technology, vol. 41, no. 11, june 1, 2023
[14]. Cătălin Beguni, Alin-Mihai Căilean, Sebastian-Andrei Avătămănit,ei, Alin-Dan Potorac, Eduard Zadobrischi and Mihai Dimian, “Increasing Vehicular Visible Light Communications Range Based on LED Current Overdriving and Variable Pulse Position Modulation: Concept and Experimental Validation”, Sensors 2023, 23, 3656
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
