Development And Production Of Board Game Components Using Additive Manufacturing Technologies
DOI:
https://doi.org/10.29284/hpcbxt76Keywords:
additive manufacturing, design, modularity, social gameAbstract
The aim of the thesis is to develop an innovative product and prototype for a social game using additive manufacturing. The focus is on correcting the negative aspects observed in the design of competitive games. The product is constructed based on basic design principles and is based on strategic games. The basic idea is a modular way of executing a game board, which contributes to various combinations of assembly and the possibilities of developing the game. Some components are constructed in the Solidworks programme, while they are designed through the application of a 3D printing device based on technologies: FDM and stereolytography. The final part was found to create new optimal solutions for the detailed analysis and innovation of existing products. It shows the importance of striving for better solutions and focusing on progress.
References
[1] T. Markussen and E. Knutz, “Playful Participation in Social Games”, ISSN 2246-3755, Denmark, 2017
[2] Jarod Kelly and Panos Y. Papalambros, “Use of shape preference information in product design”, France, 2007
[3] Vlad Petre Glăveanu, “The function of ornaments: A cultural psychological exploration”, DOI: 10.1177/1354067X13515937, Denmark, 2014
[4] I. Šarić and A. Muminović, “Industrijski dizajn“, ISBN 978-9958-601-94-1, Sarajevo, 2020
[5] Md. Imam Hossain, Md. Sakib Khan, Imrul Kayes Khan, Khan Rajib Hossain, Yanzhao He and Xiaolong Wang, “Technology of additive manufacturing: A comprehensive review“ Kufa Journal of Engineering Vol. 15, No. 1, January 2024, p.p. 108-146
[6] F. Thiesse; M. Wirth; H-G. Kemper; M. Moisa; D. Morar; H. Lasi; F. Piller; P. Buxmann; L. Mortara; S. Ford and T. Minshall, “Economic Implications of Additive Manufacturing and the Contribution of MIS“, DOI 10.1007/s12599-015-0374-4, Germany, 2015
[7] D. Godec and M. Šercer, “Aditivna proizvodnja“ ISBN 978-953-7738-26-6, Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015
[8] T. Grakov, V. Mateev and I. Marinova, “Modeling the Energy and Heating Efficiency of 3D Printing for Composite Materials with Dispersed Volumetric Particles“, Electronics 2025, https://doi.org/10.3390/electronics14040688
[9] T. Raed Mhmood and N. Kais Al-Karkhi, “ A Review of the Stereo lithography 3D Printing Process and the Effect of Parameters on Quality“, Al-Khwarizmi Engineering, Journal, Vol. 19, No. 2, June, (2023) P. P. 82- 94
[10] S.J. Hu, J. Ko, L. Weyand, H.A. ElMaraghy, T.K. Lien, Y. Koren, H. Bley, G. Chryssolouris, N. Nasr, M. Shpitalni, “Assembly system design and operations for product variety“, 2011, DOI: 10.1016/j.cirp.2011.05.004
[11] F. Krajačić, “Board game design and prototyping using 3D printing“, Zagreb University of Applied Sciences, Undergraduate Professional Study in Mechanical Engineering, Final thesis, Zagreb, 2025
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
